|
|
Vertrod Style Open Back Table
Top Heat Sealer
|
| The versatile Table-Top Open-Back
design allows for sealing of materials from North,
South, East and West. Jaw opening options are available
from 1" to 3". Heater Bar placement options
available: heater bar on top allows fro trouble-free
sealing of Tyvek pouches; double-sided heat for
sealing of thick materials up to 80MIL (.80")
or for sealing high temperature materials such as
Teflon, Tedlar, etc. |
|
Half inch thick aluminum table top for maximum
durablility. Light weight and small footprint makes
this sealer easily portable. Custom mounting options
available to allow sealer to operate at any angle,
0-360 Degrees.
Therm-O-Seal® Closed-Loop
Water Chillers available for all Water-Cooled
systems.
|
- Seal Lengths Available: 9", 14",
20", 24" & 30" (custom
lengths & configurations available upon
request).
- Seal Widths Available: 1/8", 3/16",
1/4" & 3/8" (custom widths
& configurations available upon request).
- 10" Cabinet Base.
- Water-Cooled or non Water-Cooled Heater
Bar.
- Heater Bar & Pressure Bar equipped with
our easy-to-replace Teflon.
- Hammertone Grey or FDA Compliant
White powder coated finish.
- All Stainless Steel Fasteners.
- Maintenance-Free Greaseless Needle Bearings.
- Trim Seal option available.
- PLC Time Control* or Temperature Control**
System.
- User Programmable Heat Time & Cool
Time*/Low Temp & High Temp** set points.
- Measures Temperature in the actual process
area on Heater Bar(s)**
- Operator Burn Protection - Ensures
that the heated parts of the machine are not
accessible to the operator until the low temperature
set point is reached.**
- Ensures that the melt temperature of the
material is reached on every cycle (accurate
to within approx. 5 Degrees Fahrenheit).**
|
- User-adjustable Software Rheostat allows
the operator to program the rate of temperature
rise.
- Runaway Heat Protection (shuts down
all system controls if the temperature exceeds
the setpoint by 100 Degrees Fahrenheit).
- 24VDC Control Circuitry.
- 2-Line x 20-Character Operator Interface.
- Text Error Messaging.
- Numeric Keypad Input.
- LED Indicator Lights.
- 50mm Emergency Stop.
- Cycle Counter (up to 99999-resetable).
- Cycle Timer (displays Cycle Time in
tenths of a second).
- Operates on Main Power Output of 120VAC
50/60Hz (220VAC available).
- Voltage Control (maintains constant
output to the heater element during low/high
voltage episodes.
- Proximity Switch Sensing.
- Obstruction Detection (opens sealing
jaws before going to high pressure if obstruction
is detected).
- Pressure Sensor - ensures that income
line pressure is adequate before allowing the
operator to begin the sealing process(optional
add-on).
- Pneumatic Air Cylinder.
- Footswitch Activated.
|
* Time Control Systems only.
** Temperature Control Systems only.
|
Ordering Instructions:
Your part number will consist of a Model Number
(seal length) and seal width e.g. part# 20OB-TT-1/8
indicates a 20" Seal Length and 1/8" Seal
Width (TT indicates Table Top model).
Compile your part number from the table below: |
|
9OB-TT
|
9" Seal Length |
1/8
|
1/8" Seal Width |
|
14OB-TT
|
14" Seal Length |
3/16
|
3/16" Seal Width |
|
20OB-TT
|
20" Seal Length |
1/4
|
1/4" Seal Width |
|
24OB-TT
|
24" Seal Length |
3/8
|
3/8" Seal Width |
|
30OB-TT
|
30" Seal Length |
|
|
All other configurations, please call, fax or email
our Sales Department. |
|
|
