|
|
Vertrod Style Open Back Cabinet
Heat Sealer
|
| Our Open-Back design allows for sealing
of materials from North, South, East and West. Jaw
opening options available from 1" to 6" to accommodate
a wide variety of sealing applications. Heater Bar
placement options available: heater bar on top allows
for trouble-free sealing of Tyvek pouches; double-sided
heat for sealing of thick materials up to 80MIL
(.80") or for sealing high temperature materials
such as Teflon, Tedlar, etc. Half inch thick aluminum
table-top for maximum durability. Custom mounting
options available to allow sealer to operate at
any angle, 0-360 degrees. Available as a Table-Top
model. |
|
- Seal Lengths Available: 9", 14", 20", 24" &
30" (custom lengths & configurations available
upon request).
- Seal Widths Available: 1/8", 3/16", 1/4" &
3/8" (custom widths & configurations available
upon request).
- Water-Cooled or non Water-Cooled Heater
Bar.
- Heater Bar & Pressure Bar equipped with our
easy-to-replace Teflon.
- Hammertone Grey or FDA Compliant
White powder coated finish.
- All Stainless Steel Fasteners.
- Maintenance-Free Greaseless Needle
Bearings.
- Trim Seal option available.
- PLC Time Control* or Temperature Control**
System.
- User Programmable Heat Time & Cool
Time*/Low Temp & High Temp** set points.
- Measures Temperature in the actual process
area on Heater Bar(s)**
- Operator Burn Protection - Ensures that the
heated parts of the machine are not accessible to the
operator until the low temperature set point is
reached.**
- Ensures that the melt temperature of the
material is reached on every cycle (accurate to
within approx. 5 Degrees Fahrenheit).**
|
- User-adjustable Software Rheostat allows
the operator to program the rate of temperature rise.
- Runaway Heat Protection (shuts down all
system controls if the temperature exceeds the
setpoint by 100 Degrees Fahrenheit).
- 24VDC Control Circuitry.
- 2-Line x 20-Character Operator Interface.
- Text Error Messaging.
- Numeric Keypad Input.
- LED Indicator Lights.
- 50mm Emergency Stop.
- Cycle Counter (up to 99999-resetable).
- Cycle Timer (displays Cycle Time in tenths
of a second).
- Operates on Main Power Output of 120VAC 50/60Hz
(220VAC available).
- Voltage Control (maintains constant output
to the heater element during low/high voltage
episodes.
- Proximity Switch Sensing.
- Obstruction Detection (opens sealing jaws
before going to high pressure if obstruction is
detected).
- Pressure Sensor - ensures that income line
pressure is adequate before allowing the operator to
begin the sealing process(optional add-on).
- Pneumatic Air Cylinder.
- Footswitch
Activated.
|
* Time Control Systems only.
**
Temperature Control Systems
only.
|
Ordering Instructions:
Your part number
will consist of a Model Number (seal length) and seal
width e.g. part# 20OB-3/16 indicates a 20" Seal
Length and 3/16" Seal Width.
Compile your part
number from the table below: |
|
9OB |
9" Seal Length |
1/8 |
1/8" Seal Width |
|
14OB |
14" Seal Length |
3/16 |
3/16" Seal Width |
|
20OB |
20" Seal Length |
1/4 |
1/4" Seal Width |
|
24OB |
24" Seal Length |
3/8 |
3/8" Seal Width |
|
30OB |
30" Seal Length |
|
| |
All
other configurations, please call, fax or email our Sales
Department.
|
|
