|
Vertrod Style Hand-Operated Cantilever
Heat Sealer
| Heavy Duty - seals up to 100MIL (.100").
Unobstructed sealing jaws allows for easy access from
any angle - especially useful when compressed air
supply is not available. Sealing unit weighs less
than 50lb so it can be easily transported from location
to location or can be permanently mounted to an existing
workstation. |
|
The control box is equipped with wall-mount and
carry handle. Typical applications for this machine
include (but are not limited to) heavy vinyl, polyurethane,
gusseted bags, Teflon, Teflon-coated Kapton or any
application where low volume and high durability may
be necessary. Unit can be configured for single or
double sided heat.
|
- Seal Lengths Available: 9", 14",
20", 24" & 30" (custom
lengths & configurations available upon request).
- Seal Widths Available: 1/8", 3/16",
1/4", 3/8" & 1/2" (custom
widths & configurations available upon request).
- Water-Cooled or non Water-Cooled Heater Bar.
- Heater Bar & Pressure Bar equipped with
our easy-to-replace Teflon.
- Hammertone Grey or FDA Compliant White
powder coated finish.
- All Stainless Steel Fasteners.
- Maintenance-Free Greaseless Needle Bearings.
- Trim Seal option available.
- PLC Time Control* or Temperature Control**
System.
- User Programmable Heat Time & Cool
Time*/Low Temp & High Temp** set points.
- User-adjustable Software Rheostat allows
the operator to program the rate of temperature
rise.
|
- Measures Temperature in the actual process
area on Heater Bar(s)**
- Ensures that the melt temperature of the
material is reached on every cycle (accurate
to within approx. 5 Degrees Fahrenheit).**
- Runaway Heat Protection (shuts down all
system controls if the temperature exceeds the
setpoint by 100 Degrees Fahrenheit).
- 24VDC Control Circuitry.
- 2-Line x 20-Character Operator Interface.
- Text Error Messaging.
- Numeric Keypad Input.
- LED Indicator Lights.
- 50mm Emergency Stop.
- Cycle Counter (up to 99999-resetable).
- Cycle Timer (displays Cycle Time in tenths
of a second).
- Operates on Main Power Output of 120VAC 50/60Hz
(220VAC available).
- Voltage Control (maintains constant output
to the heater element during low/high voltage
episodes.
- Proximity Switch Sensing.
|
* Time Control Systems only.
** Temperature Control Systems only.
|
|
Ordering Instructions:
Your part number will consist of a Model Number
(seal length) and seal width e.g. part# 14HT-3/8
indicates a 14" Seal Length and 3/8" Seal
Width.
Compile your part number from the table below:
|
|
9HT
|
9" Seal Length |
1/8
|
1/8" Seal Width |
|
14HT
|
14" Seal Length |
3/16
|
3/16" Seal Width |
|
20HT
|
20" Seal Length |
1/4
|
1/4" Seal Width |
|
24HT
|
24" Seal Length |
3/8
|
3/8" Seal Width |
|
30HT
|
30" Seal Length |
1/2
|
1/2" Seal Width |
All other configurations, please call, fax or email
our Sales Department. |
