|
Controller
Features
- Operates on incoming main power of 85 to 240vAC, 50/60 Hz.
- Uses 24VDC control circuits for operator safety.
- Voltage Drop Control - maintains constant wattage to heater
element during low voltage episodes.
- Obstruction Detection - Accurate to within 2mm to ensure the
safety of your operators near critical pinch points.
- Advanced Temperature Control System - Temperatures in the
sealing area can be controlled to plus or minus 5 degrees Fahrenheit.
- Runaway Heat Protection - Shuts down all system controls in
the event of runaway heat.
- Operator Burn Protection - Ensures that heated parts of the
machine are not accessible to the operator until a safe temperature
is reached.
- Resetable Cycle Counter (pass code protection optional)
- Low/High Temp Set-Points (pass code protection optional)
- Modem Communication - Ability to communicate with your Impulse
Heat Sealer via phone modem for remote diagnosis of problems
that may occur and to add new features to our Heat Sealer as
they become available.
- Improved Cycle Times.
- Data Acquisition - Our QA Assistant package (sample below)
allows user to log all system parameters of each cycle into
an Excel spreadsheet. Our proprietary system of data acquisition
and retention starts with the eight basic data points essential
to the validation process - DATE & TIME STAMP; CYCLE COUNTER;
LOW TEMP SETTING; HIGH TEMP SETTING; MAX TEMP REACHED; CYCLE
TIME, AIR LINE PRESSURE & ERROR CODES. Note the tight close
range of temperature reached at the MAX point (actual seal temperature)
and Cycle time. Such consistency results in the highest quality
and reliability in the sealing process for your packaging requirements
|
|
